DRD 2-piece (Direct Resin Deposit) Can Production Line adalah sistem canggih yang digunakan untuk manufaktur kaleng minuman aluminium. Istilah "DRD" mengacu pada metode menyimpan resin langsung ke tubuh kaleng, yang kemudian digunakan untuk membentuk bentuk kaleng. "2-piece" menunjukkan bahwa kaleng dirakit dari dua bagian terpisah: bagian bawah dan atas.
Proses produksi biasanya melibatkan langkah -langkah berikut:
1. ** Dapatkah Persiapan Tubuh **: Strip atau gulungan aluminium dimasukkan ke dalam mesin di mana mereka dipotong menjadi kosong, atau tubuh. Badan -badan ini kemudian dibentuk menjadi bentuk silinder menggunakan mesin pembentuk kaleng.
2. ** Aplikasi Resin **: Dalam proses DRD, resin diterapkan langsung ke permukaan bagian dalam tubuh kaleng. Resin ini berfungsi sebagai agen ikatan saat bagian atas terpasang.
3. ** Formasi Panel Atas **: Panel atas juga terbuat dari aluminium dan dibentuk menjadi bentuk yang diinginkan. Mereka termasuk mekanisme pull-tab atau tarik cincin untuk membuka kaleng.
4. ** Majelis **: Panel bawah dan atas kemudian dirakit bersama. Panel bawah biasanya direkatkan ke tubuh kaleng menggunakan resin yang diterapkan pada langkah 2, dan panel atas diamankan dengan sealant untuk membuat segel hermetis.
5. ** Penyegelan **: Mekanisme penyegelan digunakan untuk memasang panel atas ke panel bawah, memastikan kedap udara dan mencegah kebocoran.
6. ** Capping **: Setelah perakitan, kaleng ditutup dengan penutupan yang sesuai (misalnya, tutup sekrup, flip-top, atau pull-tab).
7. ** Kontrol Kualitas **: Sepanjang proses, pemeriksaan kontrol kualitas dilakukan untuk memastikan bahwa semua kaleng memenuhi standar yang diperlukan untuk ukuran, bentuk, dan integritas.
8. ** Kemasan **: Akhirnya, kaleng dikemas untuk distribusi.
Manfaat DRD 2-piece CAN produksi termasuk efisiensi yang lebih tinggi, pengurangan penggunaan material, dan dampak lingkungan yang lebih rendah dibandingkan dengan metode manufaktur kaleng lainnya. Aplikasi resin mengurangi kebutuhan akan pelapisan atau perawatan tambahan pada badan kaleng, membuat proses lebih berkelanjutan dan berpotensi lebih hemat biaya.